How to increase output
It can increase output power limitlessly by just increasing units or bunch of blocks of units easily.
Why is a 70cm diameter turbine the standard?
Because the unit size can be contained within “1m3”, the same as a regular refrigerator, and because this size keeps the installed water volume to 150 liters, minimizing material costs to maintain the strength of the casing. If the turbine diameter were to be decreased to 40cm, output would be reduced to about one-tenth of 3-5kWh, but the unit size would not change significantly, there would be no significant savings in material costs, and assembly labor would remain unchanged. Therefore, we have judged that a turbine diameter of less than 70cm is irrational.
Therefore, as a single household product, it operates stably and completely automatically and can be used independently with other household appliances at same time. It is no exaggeration to say again that Gravity Reactor should be the most useful household appliance in human history. Furthermore, whether an independent 1m3 unit like a block is promised to be brought into the desert or jungle, on a ship, or even a submarine, it will generate rated power as long as gravity is affected. Consequently, simply by increasing the numbers of the unit, it can be used for both “household” and “industrial” purposes.
How to increase output per system unit
If, for example, mercury, which has a specific gravity 13 times higher, is used as the fluid instead of water, the same output can be achieved with a 30cm turbine diameter and a unit size of 0.3m3. However, this requires considerable mechanical engineering precision.
Alternatively, by increasing the sealing strength inside the unit and raising the internal air pressure, the natural fluid speed increases, the rotation speed increases, and so does the output. How much the rotation speed can be increased in response to an increase in air pressure requires research and development, such as measuring the fluid speed for that air pressure and optimally designing the flow path, but once the design is complete, the cost of mass production will not change much.
The basic principle that enables the creation of a different dimension of relative rotation amplification structure
By understanding the structural principles of the current Gravity Reactor, it allows to use the difference in weight (specific gravity) and fluid velocity between the two types of fluid to increase the relative velocity and relative weight balance, and then using to those amplifying essences with the compound interest through rotation by other different appropriate fluid flow structure design. In other words, there will be an infinite number of methodologies for amplifying output.
